The Builder algorithm constructs topological objects from an existing topology and new geometries attached to the topology. It is used to construct the result of a topological operation; the existing topologies are the parts involved in the topological operation and the new geometries are the intersection lines and points. More...

#include <TopOpeBRepBuild_Builder.hxx>

Inheritance diagram for TopOpeBRepBuild_Builder:

[legend]

Public Member Functions
	TopOpeBRepBuild_Builder (const TopOpeBRepDS_BuildTool &BT)

virtual	~TopOpeBRepBuild_Builder ()

TopOpeBRepDS_BuildTool &	ChangeBuildTool ()

const TopOpeBRepDS_BuildTool &	BuildTool () const

virtual void	Perform (const Handle< TopOpeBRepDS_HDataStructure > &HDS)
	Stores the data structure <HDS>, Create shapes from the new geometries. More...

virtual void	Perform (const Handle< TopOpeBRepDS_HDataStructure > &HDS, const TopoDS_Shape &S1, const TopoDS_Shape &S2)
	Stores the data structure <HDS>, Create shapes from the new geometries, Evaluates if an operation performed on shapes S1,S2 is a particular case. More...

Handle< TopOpeBRepDS_HDataStructure >	DataStructure () const
	returns the DS handled by this builder More...

virtual void	Clear ()
	Removes all splits and merges already performed. Does NOT clear the handled DS. More...

void	MergeEdges (const TopTools_ListOfShape &L1, const TopAbs_State TB1, const TopTools_ListOfShape &L2, const TopAbs_State TB2, const Standard_Boolean onA=Standard_False, const Standard_Boolean onB=Standard_False, const Standard_Boolean onAB=Standard_False)
	Merges the two edges <S1> and <S2> keeping the parts in each edge of states <TB1> and <TB2>. Booleans onA, onB, onAB indicate whether parts of edges found as state ON respectively on first, second, and both shapes must be (or not) built. More...

void	MergeFaces (const TopTools_ListOfShape &S1, const TopAbs_State TB1, const TopTools_ListOfShape &S2, const TopAbs_State TB2, const Standard_Boolean onA=Standard_False, const Standard_Boolean onB=Standard_False, const Standard_Boolean onAB=Standard_False)
	Merges the two faces <S1> and <S2> keeping the parts in each face of states <TB1> and <TB2>. More...

void	MergeSolids (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopoDS_Shape &S2, const TopAbs_State TB2)
	Merges the two solids <S1> and <S2> keeping the parts in each solid of states <TB1> and <TB2>. More...

void	MergeShapes (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopoDS_Shape &S2, const TopAbs_State TB2)
	Merges the two shapes <S1> and <S2> keeping the parts of states <TB1>,<TB2> in <S1>,<S2>. More...

void	End ()

Standard_Boolean	Classify () const

void	ChangeClassify (const Standard_Boolean B)

void	MergeSolid (const TopoDS_Shape &S, const TopAbs_State TB)
	Merges the solid <S> keeping the parts of state <TB>. More...

const TopoDS_Shape &	NewVertex (const Standard_Integer I) const
	Returns the vertex created on point . More...

const TopTools_ListOfShape &	NewEdges (const Standard_Integer I) const
	Returns the edges created on curve . More...

const TopTools_ListOfShape &	NewFaces (const Standard_Integer I) const
	Returns the faces created on surface . More...

Standard_Boolean	IsSplit (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns True if the shape <S> has been split. More...

const TopTools_ListOfShape &	Splits (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns the split parts <TB> of shape <S>. More...

Standard_Boolean	IsMerged (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns True if the shape <S> has been merged. More...

const TopTools_ListOfShape &	Merged (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns the merged parts <TB> of shape <S>. More...

void	InitSection ()

void	SplitSectionEdges ()
	create parts ON solid of section edges More...

virtual void	SplitSectionEdge (const TopoDS_Shape &E)
	create parts ON solid of section edges More...

void	SectionCurves (TopTools_ListOfShape &L)
	return the section edges built on new curves. More...

void	SectionEdges (TopTools_ListOfShape &L)
	return the parts of edges found ON the boundary of the two arguments S1,S2 of Perform() More...

void	FillSecEdgeAncestorMap (const Standard_Integer aShapeRank, const TopTools_MapOfShape &aMapON, TopTools_DataMapOfShapeShape &anAncMap) const
	Fills anAncMap with pairs (edge,ancestor edge) for each split from the map aMapON for the shape object identified by ShapeRank. More...

void	Section (TopTools_ListOfShape &L)
	return all section edges. More...

const TopTools_ListOfShape &	Section ()

void	BuildVertices (const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create vertices on DS points. More...

void	BuildEdges (const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create shapes from the new geometries. More...

const TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State &	MSplit (const TopAbs_State s) const

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State &	ChangeMSplit (const TopAbs_State s)

void	MakeEdges (const TopoDS_Shape &E, TopOpeBRepBuild_EdgeBuilder &B, TopTools_ListOfShape &L)

void	MakeFaces (const TopoDS_Shape &F, TopOpeBRepBuild_FaceBuilder &B, TopTools_ListOfShape &L)

void	MakeSolids (TopOpeBRepBuild_SolidBuilder &B, TopTools_ListOfShape &L)

void	MakeShells (TopOpeBRepBuild_SolidBuilder &B, TopTools_ListOfShape &L)

TopTools_ListOfShape &	ChangeSplit (const TopoDS_Shape &S, const TopAbs_State TB)
	Returns a ref.on the list of shapes connected to <S> as <TB> split parts of <S>. Mark <S> as split in <TB> parts. More...

Standard_Boolean	Opec12 () const

Standard_Boolean	Opec21 () const

Standard_Boolean	Opecom () const

Standard_Boolean	Opefus () const

TopAbs_State	ShapePosition (const TopoDS_Shape &S, const TopTools_ListOfShape &LS)

Standard_Boolean	KeepShape (const TopoDS_Shape &S, const TopTools_ListOfShape &LS, const TopAbs_State T)

void	FindSameDomain (TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

void	FindSameDomainSameOrientation (TopTools_ListOfShape &LSO, TopTools_ListOfShape &LDO) const

void	MapShapes (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

void	ClearMaps ()

void	FindSameRank (const TopTools_ListOfShape &L1, const Standard_Integer R, TopTools_ListOfShape &L2) const

Standard_Integer	ShapeRank (const TopoDS_Shape &S) const

Standard_Boolean	IsShapeOf (const TopoDS_Shape &S, const Standard_Integer I12) const

Standard_Integer	FindIsKPart ()

Standard_Integer	IsKPart () const

virtual void	MergeKPart ()

virtual void	MergeKPart (const TopAbs_State TB1, const TopAbs_State TB2)

void	MergeKPartiskole ()

void	MergeKPartiskoletge ()

void	MergeKPartisdisj ()

void	MergeKPartisfafa ()

void	MergeKPartissoso ()

Standard_Integer	KPiskole ()

Standard_Integer	KPiskoletge ()

Standard_Integer	KPisdisj ()

Standard_Integer	KPisfafa ()

Standard_Integer	KPissoso ()

void	KPClearMaps ()

Standard_Integer	KPlhg (const TopoDS_Shape &S, const TopAbs_ShapeEnum T, TopTools_ListOfShape &L) const

Standard_Integer	KPlhg (const TopoDS_Shape &S, const TopAbs_ShapeEnum T) const

Standard_Integer	KPlhsd (const TopoDS_Shape &S, const TopAbs_ShapeEnum T, TopTools_ListOfShape &L) const

Standard_Integer	KPlhsd (const TopoDS_Shape &S, const TopAbs_ShapeEnum T) const

TopAbs_State	KPclasSS (const TopoDS_Shape &S1, const TopTools_ListOfShape &exceptLS1, const TopoDS_Shape &S2)

TopAbs_State	KPclasSS (const TopoDS_Shape &S1, const TopoDS_Shape &exceptS1, const TopoDS_Shape &S2)

TopAbs_State	KPclasSS (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

Standard_Boolean	KPiskolesh (const TopoDS_Shape &S, TopTools_ListOfShape &LS, TopTools_ListOfShape &LF) const

Standard_Boolean	KPiskoletgesh (const TopoDS_Shape &S, TopTools_ListOfShape &LS, TopTools_ListOfShape &LF) const

void	KPSameDomain (TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

Standard_Integer	KPisdisjsh (const TopoDS_Shape &S) const

Standard_Integer	KPisfafash (const TopoDS_Shape &S) const

Standard_Integer	KPissososh (const TopoDS_Shape &S) const

void	KPiskoleanalyse (const TopAbs_State FT1, const TopAbs_State FT2, const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer &I, Standard_Integer &I1, Standard_Integer &I2) const

void	KPiskoletgeanalyse (const TopOpeBRepDS_Config Conf, const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer &I) const

void	KPisdisjanalyse (const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer &I, Standard_Integer &IC1, Standard_Integer &IC2) const

TopAbs_State	KPclassF (const TopoDS_Shape &F1, const TopoDS_Shape &F2)

void	KPclassFF (const TopoDS_Shape &F1, const TopoDS_Shape &F2, TopAbs_State &T1, TopAbs_State &T2)

Standard_Boolean	KPiskoleFF (const TopoDS_Shape &F1, const TopoDS_Shape &F2, TopAbs_State &T1, TopAbs_State &T2)

TopoDS_Shape	KPmakeface (const TopoDS_Shape &F1, const TopTools_ListOfShape &LF2, const TopAbs_State T1, const TopAbs_State T2, const Standard_Boolean R1, const Standard_Boolean R2)

void	SplitEvisoONperiodicF ()

void	GMergeSolids (const TopTools_ListOfShape &LSO1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G)

void	GFillSolidsSFS (const TopTools_ListOfShape &LSO1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

virtual void	GFillSolidSFS (const TopoDS_Shape &SO1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillSurfaceTopologySFS (const TopoDS_Shape &SO1, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillSurfaceTopologySFS (const TopOpeBRepDS_SurfaceIterator &IT, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS) const

virtual void	GFillShellSFS (const TopoDS_Shape &SH1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillFaceSFS (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GSplitFaceSFS (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSclass, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GMergeFaceSFS (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GSplitFace (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, const TopTools_ListOfShape &LSclass)

void	AddONPatchesSFS (const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	FillOnPatches (const TopTools_ListOfShape &anEdgesON, const TopoDS_Shape &aBaseFace, const TopTools_IndexedMapOfOrientedShape &avoidMap)

void	FindFacesTouchingEdge (const TopoDS_Shape &aFace, const TopoDS_Shape &anEdge, const Standard_Integer aShRank, TopTools_ListOfShape &aFaces) const

void	GMergeFaces (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G)

void	GFillFacesWES (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillFacesWESK (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES, const Standard_Integer K)

void	GFillFacesWESMakeFaces (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopTools_ListOfShape &LSO, const TopOpeBRepBuild_GTopo &G)

void	GFillFaceWES (const TopoDS_Shape &F, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillCurveTopologyWES (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillCurveTopologyWES (const TopOpeBRepDS_CurveIterator &IT, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES) const

void	GFillONPartsWES (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, const TopTools_ListOfShape &LSclass, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillWireWES (const TopoDS_Shape &W, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillEdgeWES (const TopoDS_Shape &E, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GSplitEdgeWES (const TopoDS_Shape &E, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GMergeEdgeWES (const TopoDS_Shape &E, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GSplitEdge (const TopoDS_Shape &E, const TopOpeBRepBuild_GTopo &G, const TopTools_ListOfShape &LSclass)

void	GMergeEdges (const TopTools_ListOfShape &LE1, const TopTools_ListOfShape &LE2, const TopOpeBRepBuild_GTopo &G)

void	GFillEdgesPVS (const TopTools_ListOfShape &LE1, const TopTools_ListOfShape &LE2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS)

void	GFillEdgePVS (const TopoDS_Shape &E, const TopTools_ListOfShape &LE2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS)

void	GFillPointTopologyPVS (const TopoDS_Shape &E, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS)

void	GFillPointTopologyPVS (const TopoDS_Shape &E, const TopOpeBRepDS_PointIterator &IT, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS) const

Standard_Boolean	GParamOnReference (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P) const

Standard_Boolean	GKeepShape (const TopoDS_Shape &S, const TopTools_ListOfShape &Lref, const TopAbs_State T)

Standard_Boolean	GKeepShape1 (const TopoDS_Shape &S, const TopTools_ListOfShape &Lref, const TopAbs_State T, TopAbs_State &pos)
	return True if S is classified <T> / Lref shapes More...

void	GKeepShapes (const TopoDS_Shape &S, const TopTools_ListOfShape &Lref, const TopAbs_State T, const TopTools_ListOfShape &Lin, TopTools_ListOfShape &Lou)
	add to Lou the shapes of Lin classified <T> / Lref shapes. Lou is not cleared. (S is a dummy trace argument) More...

void	GSFSMakeSolids (const TopoDS_Shape &SOF, TopOpeBRepBuild_ShellFaceSet &SFS, TopTools_ListOfShape &LOSO)

void	GSOBUMakeSolids (const TopoDS_Shape &SOF, TopOpeBRepBuild_SolidBuilder &SOBU, TopTools_ListOfShape &LOSO)

virtual void	GWESMakeFaces (const TopoDS_Shape &FF, TopOpeBRepBuild_WireEdgeSet &WES, TopTools_ListOfShape &LOF)

void	GFABUMakeFaces (const TopoDS_Shape &FF, TopOpeBRepBuild_FaceBuilder &FABU, TopTools_ListOfShape &LOF, TopTools_DataMapOfShapeInteger &MWisOld)

void	RegularizeFaces (const TopoDS_Shape &FF, const TopTools_ListOfShape &lnewFace, TopTools_ListOfShape &LOF)

void	RegularizeFace (const TopoDS_Shape &FF, const TopoDS_Shape &newFace, TopTools_ListOfShape &LOF)

void	RegularizeSolids (const TopoDS_Shape &SS, const TopTools_ListOfShape &lnewSolid, TopTools_ListOfShape &LOS)

void	RegularizeSolid (const TopoDS_Shape &SS, const TopoDS_Shape &newSolid, TopTools_ListOfShape &LOS)

void	GPVSMakeEdges (const TopoDS_Shape &EF, TopOpeBRepBuild_PaveSet &PVS, TopTools_ListOfShape &LOE) const

void	GEDBUMakeEdges (const TopoDS_Shape &EF, TopOpeBRepBuild_EdgeBuilder &EDBU, TopTools_ListOfShape &LOE) const

Standard_Boolean	GToSplit (const TopoDS_Shape &S, const TopAbs_State TB) const

Standard_Boolean	GToMerge (const TopoDS_Shape &S) const

void	GFindSamDom (const TopoDS_Shape &S, TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

void	GFindSamDom (TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

void	GFindSamDomSODO (const TopoDS_Shape &S, TopTools_ListOfShape &LSO, TopTools_ListOfShape &LDO) const

void	GFindSamDomSODO (TopTools_ListOfShape &LSO, TopTools_ListOfShape &LDO) const

void	GMapShapes (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

void	GClearMaps ()

void	GFindSameRank (const TopTools_ListOfShape &L1, const Standard_Integer R, TopTools_ListOfShape &L2) const

Standard_Integer	GShapeRank (const TopoDS_Shape &S) const

Standard_Boolean	GIsShapeOf (const TopoDS_Shape &S, const Standard_Integer I12) const

void	GdumpLS (const TopTools_ListOfShape &L) const

void	GdumpSHA (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpSHAORI (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpSHAORIGEO (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpSHASTA (const Standard_Integer iS, const TopAbs_State T, const TCollection_AsciiString &a="", const TCollection_AsciiString &b="") const

void	GdumpSHASTA (const TopoDS_Shape &S, const TopAbs_State T, const TCollection_AsciiString &a="", const TCollection_AsciiString &b="") const

void	GdumpSHASTA (const Standard_Integer iS, const TopAbs_State T, const TopOpeBRepBuild_ShapeSet &SS, const TCollection_AsciiString &a="", const TCollection_AsciiString &b="", const TCollection_AsciiString &c="\) const

void	GdumpEDG (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpEDGVER (const TopoDS_Shape &E, const TopoDS_Shape &V, const Standard_Address str=NULL) const

void	GdumpSAMDOM (const TopTools_ListOfShape &L, const Standard_Address str=NULL) const

void	GdumpEXP (const TopOpeBRepTool_ShapeExplorer &E) const

void	GdumpSOBU (TopOpeBRepBuild_SolidBuilder &SB) const

void	GdumpFABU (TopOpeBRepBuild_FaceBuilder &FB) const

void	GdumpEDBU (TopOpeBRepBuild_EdgeBuilder &EB) const

Standard_Boolean	GtraceSPS (const Standard_Integer iS) const

Standard_Boolean	GtraceSPS (const Standard_Integer iS, const Standard_Integer jS) const

Standard_Boolean	GtraceSPS (const TopoDS_Shape &S) const

Standard_Boolean	GtraceSPS (const TopoDS_Shape &S, Standard_Integer &IS) const

void	GdumpSHASETreset ()

Standard_Integer	GdumpSHASETindex ()

Static Public Member Functions
static TopAbs_ShapeEnum	TopType (const TopoDS_Shape &S)

static Standard_Boolean	Reverse (const TopAbs_State T1, const TopAbs_State T2)

static TopAbs_Orientation	Orient (const TopAbs_Orientation O, const Standard_Boolean R)

static Standard_Boolean	Contains (const TopoDS_Shape &S, const TopTools_ListOfShape &L)

static Standard_Integer	KPls (const TopoDS_Shape &S, const TopAbs_ShapeEnum T, TopTools_ListOfShape &L)

static Standard_Integer	KPls (const TopoDS_Shape &S, const TopAbs_ShapeEnum T)

static Standard_Boolean	KPContains (const TopoDS_Shape &S, const TopTools_ListOfShape &L)

static Standard_Integer	KPreturn (const Standard_Integer KP)

static Standard_Boolean	GTakeCommonOfSame (const TopOpeBRepBuild_GTopo &G)

static Standard_Boolean	GTakeCommonOfDiff (const TopOpeBRepBuild_GTopo &G)

static Standard_Boolean	GContains (const TopoDS_Shape &S, const TopTools_ListOfShape &L)

static void	GCopyList (const TopTools_ListOfShape &Lin, const Standard_Integer i1, const Standard_Integer i2, TopTools_ListOfShape &Lou)

static void	GCopyList (const TopTools_ListOfShape &Lin, TopTools_ListOfShape &Lou)

static void	GdumpPNT (const gp_Pnt &P)

static void	GdumpORIPARPNT (const TopAbs_Orientation o, const Standard_Real p, const gp_Pnt &Pnt)

static void	PrintGeo (const TopoDS_Shape &S)

static void	PrintSur (const TopoDS_Face &F)

static void	PrintCur (const TopoDS_Edge &E)

static void	PrintPnt (const TopoDS_Vertex &V)

static void	PrintOri (const TopoDS_Shape &S)

static TCollection_AsciiString	StringState (const TopAbs_State S)

static Standard_Boolean	GcheckNBOUNDS (const TopoDS_Shape &E)

Protected Member Functions
void	BuildEdges (const Standard_Integer iC, const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create edges on the new curve <Icurv>. More...

void	BuildFaces (const Standard_Integer iS, const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create faces on the new surface <ISurf>. More...

void	BuildFaces (const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create shapes from the new geometries. More...

void	SplitEdge (const TopoDS_Shape &E1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <E1> keeping the parts of state <TB1>. More...

void	SplitEdge1 (const TopoDS_Shape &E1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <E1> keeping the parts of state <TB1>. More...

void	SplitEdge2 (const TopoDS_Shape &E1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <E1> keeping the parts of state <TB1>. More...

void	SplitFace (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <F1> keeping the parts of state <TB1>. Merge faces with same domain, keeping parts of state <TB2>. More...

void	SplitFace1 (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopAbs_State TB2)

void	SplitFace2 (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopAbs_State TB2)

void	SplitSolid (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <S1> keeping the parts of state <TB1>. More...

void	SplitShapes (TopOpeBRepTool_ShapeExplorer &Ex, const TopAbs_State TB1, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet &SS, const Standard_Boolean RevOri)
	Explore shapes of given by explorer <Ex> to split them. Store new shapes in the set <SS>. According to RevOri, reverse or not their orientation. More...

void	FillFace (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopTools_ListOfShape &LF2, const TopAbs_State TB2, TopOpeBRepBuild_WireEdgeSet &WES, const Standard_Boolean RevOri)
	Split edges of <F1> and store wires and edges in the set <WES>. According to RevOri, reverse (or not) orientation. More...

void	FillSolid (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopTools_ListOfShape &LS2, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet &SS, const Standard_Boolean RevOri)
	Split faces of <S1> and store shells and faces in the set <SS>. According to RevOri, reverse (or not) orientation. More...

void	FillShape (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopTools_ListOfShape &LS2, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet &SS, const Standard_Boolean RevOri)
	Split subshapes of <S1> and store subshapes in the set <SS>. According to RevOri, reverse (or not) orientation. More...

void	FillVertexSet (TopOpeBRepDS_PointIterator &IT, const TopAbs_State TB, TopOpeBRepBuild_PaveSet &PVS) const
	fills the vertex set PVS with the point iterator IT. IT accesses a list of interferences which geometry is a point or a vertex. TB indicates the orientation to give to the geometries found in interference list accessed by IT. More...

void	FillVertexSetOnValue (const TopOpeBRepDS_PointIterator &IT, const TopAbs_State TB, TopOpeBRepBuild_PaveSet &PVS) const
	fills vertex set PVS with the current value of IT. I geometry is a point or a vertex. TB indicates the orientation to give to geometries found I More...

Standard_Boolean	ToSplit (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns True if the shape <S> has not already been split. More...

void	MarkSplit (const TopoDS_Shape &S, const TopAbs_State TB, const Standard_Boolean B=Standard_True)
	add the shape <S> to the map of split shapes. mark <S> as split/not split on <state>, according to B value. More...

TopTools_ListOfShape &	ChangeMerged (const TopoDS_Shape &S, const TopAbs_State TB)
	Returns a ref. on the list of shapes connected to <S> as <TB> merged parts of <S>. More...

TopoDS_Shape &	ChangeNewVertex (const Standard_Integer I)
	Returns a ref. on the vertex created on point . More...

TopTools_ListOfShape &	ChangeNewEdges (const Standard_Integer I)
	Returns a ref. on the list of edges created on curve . More...

TopTools_ListOfShape &	ChangeNewFaces (const Standard_Integer I)
	Returns a ref. on the list of faces created on surface . More...

void	AddIntersectionEdges (TopoDS_Shape &F, const TopAbs_State TB, const Standard_Boolean RevOri, TopOpeBRepBuild_ShapeSet &ES) const

void	UpdateSplitAndMerged (const TopTools_DataMapOfIntegerListOfShape &mle, const TopTools_DataMapOfIntegerShape &mre, const TopTools_DataMapOfShapeShape &mlf, const TopAbs_State state)

Protected Attributes
TopAbs_State	myState1

TopAbs_State	myState2

TopoDS_Shape	myShape1

TopoDS_Shape	myShape2

Handle< TopOpeBRepDS_HDataStructure >	myDataStructure

TopOpeBRepDS_BuildTool	myBuildTool

Handle< TopTools_HArray1OfShape >	myNewVertices

TopTools_DataMapOfIntegerListOfShape	myNewEdges

Handle< TopTools_HArray1OfListOfShape >	myNewFaces

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	mySplitIN

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	mySplitON

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	mySplitOUT

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	myMergedIN

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	myMergedON

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	myMergedOUT

TopTools_ListOfShape	myEmptyShapeList

TopTools_ListOfShape	myListOfSolid

TopTools_ListOfShape	myListOfFace

TopTools_ListOfShape	myListOfEdge

TopTools_DataMapOfShapeListOfShape	myFSplits

TopTools_DataMapOfShapeListOfShape	myESplits

Standard_Boolean	mySectionDone

Standard_Boolean	mySplitSectionEdgesDone

TopTools_ListOfShape	mySection

TopoDS_Solid	mySolidReference

TopoDS_Solid	mySolidToFill

TopTools_ListOfShape	myFaceAvoid

TopoDS_Face	myFaceReference

TopoDS_Face	myFaceToFill

TopTools_ListOfShape	myEdgeAvoid

TopoDS_Edge	myEdgeReference

TopoDS_Edge	myEdgeToFill

TopTools_ListOfShape	myVertexAvoid

TopTools_IndexedMapOfShape	myMAP1

TopTools_IndexedMapOfShape	myMAP2

Standard_Integer	myIsKPart

TopTools_DataMapOfShapeListOfShape	myKPMAPf1f2

Standard_Integer	mySHASETindex

Standard_Boolean	myClassifyDef

Standard_Boolean	myClassifyVal

TopOpeBRepTool_ShapeClassifier	myShapeClassifier

TopTools_MapOfShape	myMemoSplit

TCollection_AsciiString	myEmptyAS

Standard_Boolean	myProcessON

TopTools_IndexedDataMapOfShapeShape	myONFacesMap

TopTools_IndexedMapOfOrientedShape	myONElemMap

Detailed Description

The Builder algorithm constructs topological objects from an existing topology and new geometries attached to the topology. It is used to construct the result of a topological operation; the existing topologies are the parts involved in the topological operation and the new geometries are the intersection lines and points.

Constructor & Destructor Documentation

◆ TopOpeBRepBuild_Builder()

TopOpeBRepBuild_Builder::TopOpeBRepBuild_Builder ( const TopOpeBRepDS_BuildTool & BT )

◆ ~TopOpeBRepBuild_Builder()

virtual TopOpeBRepBuild_Builder::~TopOpeBRepBuild_Builder ( )

virtual

Member Function Documentation

◆ AddIntersectionEdges()

void TopOpeBRepBuild_Builder::AddIntersectionEdges	(	TopoDS_Shape &	F,
		const TopAbs_State	TB,
		const Standard_Boolean	RevOri,
		TopOpeBRepBuild_ShapeSet &	ES
	)		const

protected

◆ AddONPatchesSFS()

void TopOpeBRepBuild_Builder::AddONPatchesSFS	(	const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ BuildEdges() [1/2]

void TopOpeBRepBuild_Builder::BuildEdges ( const Handle< TopOpeBRepDS_HDataStructure > & DS )

update the DS by creating new geometries. create shapes from the new geometries.

◆ BuildEdges() [2/2]

void TopOpeBRepBuild_Builder::BuildEdges	(	const Standard_Integer	iC,
		const Handle< TopOpeBRepDS_HDataStructure > &	DS
	)

protected

update the DS by creating new geometries. create edges on the new curve <Icurv>.

◆ BuildFaces() [1/2]

void TopOpeBRepBuild_Builder::BuildFaces	(	const Standard_Integer	iS,
		const Handle< TopOpeBRepDS_HDataStructure > &	DS
	)

protected

update the DS by creating new geometries. create faces on the new surface <ISurf>.

◆ BuildFaces() [2/2]

void TopOpeBRepBuild_Builder::BuildFaces ( const Handle< TopOpeBRepDS_HDataStructure > & DS )

protected

update the DS by creating new geometries. create shapes from the new geometries.

◆ BuildTool()

const TopOpeBRepDS_BuildTool& TopOpeBRepBuild_Builder::BuildTool ( ) const

◆ BuildVertices()

void TopOpeBRepBuild_Builder::BuildVertices ( const Handle< TopOpeBRepDS_HDataStructure > & DS )

update the DS by creating new geometries. create vertices on DS points.

◆ ChangeBuildTool()

TopOpeBRepDS_BuildTool& TopOpeBRepBuild_Builder::ChangeBuildTool ( )

◆ ChangeClassify()

void TopOpeBRepBuild_Builder::ChangeClassify ( const Standard_Boolean B )

◆ ChangeMerged()

TopTools_ListOfShape& TopOpeBRepBuild_Builder::ChangeMerged	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)

protected

Returns a ref. on the list of shapes connected to <S> as <TB> merged parts of <S>.

◆ ChangeMSplit()

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State& TopOpeBRepBuild_Builder::ChangeMSplit ( const TopAbs_State s )

◆ ChangeNewEdges()

TopTools_ListOfShape& TopOpeBRepBuild_Builder::ChangeNewEdges ( const Standard_Integer I )

protected

Returns a ref. on the list of edges created on curve .

◆ ChangeNewFaces()

TopTools_ListOfShape& TopOpeBRepBuild_Builder::ChangeNewFaces ( const Standard_Integer I )

protected

Returns a ref. on the list of faces created on surface .

◆ ChangeNewVertex()

TopoDS_Shape& TopOpeBRepBuild_Builder::ChangeNewVertex ( const Standard_Integer I )

protected

Returns a ref. on the vertex created on point .

◆ ChangeSplit()

TopTools_ListOfShape& TopOpeBRepBuild_Builder::ChangeSplit	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)

Returns a ref.on the list of shapes connected to <S> as <TB> split parts of <S>. Mark <S> as split in <TB> parts.

◆ Classify()

Standard_Boolean TopOpeBRepBuild_Builder::Classify ( ) const

◆ Clear()

virtual void TopOpeBRepBuild_Builder::Clear ( )

virtual

Removes all splits and merges already performed. Does NOT clear the handled DS.

Reimplemented in TopOpeBRepBuild_Builder1.

◆ ClearMaps()

void TopOpeBRepBuild_Builder::ClearMaps ( )

◆ Contains()

static Standard_Boolean TopOpeBRepBuild_Builder::Contains	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	L
	)

static

◆ DataStructure()

Handle< TopOpeBRepDS_HDataStructure > TopOpeBRepBuild_Builder::DataStructure ( ) const

returns the DS handled by this builder

◆ End()

void TopOpeBRepBuild_Builder::End ( )

◆ FillFace()

void TopOpeBRepBuild_Builder::FillFace	(	const TopoDS_Shape &	F1,
		const TopAbs_State	TB1,
		const TopTools_ListOfShape &	LF2,
		const TopAbs_State	TB2,
		TopOpeBRepBuild_WireEdgeSet &	WES,
		const Standard_Boolean	RevOri
	)

protected

Split edges of <F1> and store wires and edges in the set <WES>. According to RevOri, reverse (or not) orientation.

◆ FillOnPatches()

void TopOpeBRepBuild_Builder::FillOnPatches	(	const TopTools_ListOfShape &	anEdgesON,
		const TopoDS_Shape &	aBaseFace,
		const TopTools_IndexedMapOfOrientedShape &	avoidMap
	)

◆ FillSecEdgeAncestorMap()

void TopOpeBRepBuild_Builder::FillSecEdgeAncestorMap	(	const Standard_Integer	aShapeRank,
		const TopTools_MapOfShape &	aMapON,
		TopTools_DataMapOfShapeShape &	anAncMap
	)		const

Fills anAncMap with pairs (edge,ancestor edge) for each split from the map aMapON for the shape object identified by ShapeRank.

◆ FillShape()

void TopOpeBRepBuild_Builder::FillShape	(	const TopoDS_Shape &	S1,
		const TopAbs_State	TB1,
		const TopTools_ListOfShape &	LS2,
		const TopAbs_State	TB2,
		TopOpeBRepBuild_ShapeSet &	SS,
		const Standard_Boolean	RevOri
	)

protected

Split subshapes of <S1> and store subshapes in the set <SS>. According to RevOri, reverse (or not) orientation.

◆ FillSolid()

void TopOpeBRepBuild_Builder::FillSolid	(	const TopoDS_Shape &	S1,
		const TopAbs_State	TB1,
		const TopTools_ListOfShape &	LS2,
		const TopAbs_State	TB2,
		TopOpeBRepBuild_ShapeSet &	SS,
		const Standard_Boolean	RevOri
	)

protected

Split faces of <S1> and store shells and faces in the set <SS>. According to RevOri, reverse (or not) orientation.

◆ FillVertexSet()

void TopOpeBRepBuild_Builder::FillVertexSet	(	TopOpeBRepDS_PointIterator &	IT,
		const TopAbs_State	TB,
		TopOpeBRepBuild_PaveSet &	PVS
	)		const

protected

fills the vertex set PVS with the point iterator IT. IT accesses a list of interferences which geometry is a point or a vertex. TB indicates the orientation to give to the geometries found in interference list accessed by IT.

◆ FillVertexSetOnValue()

void TopOpeBRepBuild_Builder::FillVertexSetOnValue	(	const TopOpeBRepDS_PointIterator &	IT,
		const TopAbs_State	TB,
		TopOpeBRepBuild_PaveSet &	PVS
	)		const

protected

fills vertex set PVS with the current value of IT. I geometry is a point or a vertex. TB indicates the orientation to give to geometries found I

◆ FindFacesTouchingEdge()

void TopOpeBRepBuild_Builder::FindFacesTouchingEdge	(	const TopoDS_Shape &	aFace,
		const TopoDS_Shape &	anEdge,
		const Standard_Integer	aShRank,
		TopTools_ListOfShape &	aFaces
	)		const

◆ FindIsKPart()

Standard_Integer TopOpeBRepBuild_Builder::FindIsKPart ( )

◆ FindSameDomain()

void TopOpeBRepBuild_Builder::FindSameDomain	(	TopTools_ListOfShape &	L1,
		TopTools_ListOfShape &	L2
	)		const

◆ FindSameDomainSameOrientation()

void TopOpeBRepBuild_Builder::FindSameDomainSameOrientation	(	TopTools_ListOfShape &	LSO,
		TopTools_ListOfShape &	LDO
	)		const

◆ FindSameRank()

void TopOpeBRepBuild_Builder::FindSameRank	(	const TopTools_ListOfShape &	L1,
		const Standard_Integer	R,
		TopTools_ListOfShape &	L2
	)		const

◆ GcheckNBOUNDS()

static Standard_Boolean TopOpeBRepBuild_Builder::GcheckNBOUNDS ( const TopoDS_Shape & E )

static

◆ GClearMaps()

void TopOpeBRepBuild_Builder::GClearMaps ( )

◆ GContains()

static Standard_Boolean TopOpeBRepBuild_Builder::GContains	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	L
	)

static

◆ GCopyList() [1/2]

static void TopOpeBRepBuild_Builder::GCopyList	(	const TopTools_ListOfShape &	Lin,
		const Standard_Integer	i1,
		const Standard_Integer	i2,
		TopTools_ListOfShape &	Lou
	)

static

◆ GCopyList() [2/2]

static void TopOpeBRepBuild_Builder::GCopyList	(	const TopTools_ListOfShape &	Lin,
		TopTools_ListOfShape &	Lou
	)

static

◆ GdumpEDBU()

void TopOpeBRepBuild_Builder::GdumpEDBU ( TopOpeBRepBuild_EdgeBuilder & EB ) const

◆ GdumpEDG()

void TopOpeBRepBuild_Builder::GdumpEDG	(	const TopoDS_Shape &	S,
		const Standard_Address	str = `NULL`
	)		const

◆ GdumpEDGVER()

void TopOpeBRepBuild_Builder::GdumpEDGVER	(	const TopoDS_Shape &	E,
		const TopoDS_Shape &	V,
		const Standard_Address	str = `NULL`
	)		const

◆ GdumpEXP()

void TopOpeBRepBuild_Builder::GdumpEXP ( const TopOpeBRepTool_ShapeExplorer & E ) const

◆ GdumpFABU()

void TopOpeBRepBuild_Builder::GdumpFABU ( TopOpeBRepBuild_FaceBuilder & FB ) const

◆ GdumpLS()

void TopOpeBRepBuild_Builder::GdumpLS ( const TopTools_ListOfShape & L ) const

◆ GdumpORIPARPNT()

static void TopOpeBRepBuild_Builder::GdumpORIPARPNT	(	const TopAbs_Orientation	o,
		const Standard_Real	p,
		const gp_Pnt &	Pnt
	)

static

◆ GdumpPNT()

static void TopOpeBRepBuild_Builder::GdumpPNT ( const gp_Pnt & P )

static

◆ GdumpSAMDOM()

void TopOpeBRepBuild_Builder::GdumpSAMDOM	(	const TopTools_ListOfShape &	L,
		const Standard_Address	str = `NULL`
	)		const

◆ GdumpSHA()

void TopOpeBRepBuild_Builder::GdumpSHA	(	const TopoDS_Shape &	S,
		const Standard_Address	str = `NULL`
	)		const

◆ GdumpSHAORI()

void TopOpeBRepBuild_Builder::GdumpSHAORI	(	const TopoDS_Shape &	S,
		const Standard_Address	str = `NULL`
	)		const

◆ GdumpSHAORIGEO()

void TopOpeBRepBuild_Builder::GdumpSHAORIGEO	(	const TopoDS_Shape &	S,
		const Standard_Address	str = `NULL`
	)		const

◆ GdumpSHASETindex()

Standard_Integer TopOpeBRepBuild_Builder::GdumpSHASETindex ( )

◆ GdumpSHASETreset()

void TopOpeBRepBuild_Builder::GdumpSHASETreset ( )

◆ GdumpSHASTA() [1/3]

void TopOpeBRepBuild_Builder::GdumpSHASTA	(	const Standard_Integer	iS,
		const TopAbs_State	T,
		const TCollection_AsciiString &	a = `""`,
		const TCollection_AsciiString &	b = `""`
	)		const

◆ GdumpSHASTA() [2/3]

void TopOpeBRepBuild_Builder::GdumpSHASTA	(	const TopoDS_Shape &	S,
		const TopAbs_State	T,
		const TCollection_AsciiString &	a = `""`,
		const TCollection_AsciiString &	b = `""`
	)		const

◆ GdumpSHASTA() [3/3]

void TopOpeBRepBuild_Builder::GdumpSHASTA	(	const Standard_Integer	iS,
		const TopAbs_State	T,
		const TopOpeBRepBuild_ShapeSet &	SS,
		const TCollection_AsciiString &	a = `""`,
		const TCollection_AsciiString &	b = `""`
	)

◆ GdumpSOBU()

void TopOpeBRepBuild_Builder::GdumpSOBU ( TopOpeBRepBuild_SolidBuilder & SB ) const

◆ GEDBUMakeEdges()

void TopOpeBRepBuild_Builder::GEDBUMakeEdges	(	const TopoDS_Shape &	EF,
		TopOpeBRepBuild_EdgeBuilder &	EDBU,
		TopTools_ListOfShape &	LOE
	)		const

◆ GFABUMakeFaces()

void TopOpeBRepBuild_Builder::GFABUMakeFaces	(	const TopoDS_Shape &	FF,
		TopOpeBRepBuild_FaceBuilder &	FABU,
		TopTools_ListOfShape &	LOF,
		TopTools_DataMapOfShapeInteger &	MWisOld
	)

◆ GFillCurveTopologyWES() [1/2]

void TopOpeBRepBuild_Builder::GFillCurveTopologyWES	(	const TopoDS_Shape &	F,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillCurveTopologyWES() [2/2]

void TopOpeBRepBuild_Builder::GFillCurveTopologyWES	(	const TopOpeBRepDS_CurveIterator &	IT,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)		const

◆ GFillEdgePVS()

void TopOpeBRepBuild_Builder::GFillEdgePVS	(	const TopoDS_Shape &	E,
		const TopTools_ListOfShape &	LE2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_PaveSet &	PVS
	)

◆ GFillEdgesPVS()

void TopOpeBRepBuild_Builder::GFillEdgesPVS	(	const TopTools_ListOfShape &	LE1,
		const TopTools_ListOfShape &	LE2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_PaveSet &	PVS
	)

◆ GFillEdgeWES()

void TopOpeBRepBuild_Builder::GFillEdgeWES	(	const TopoDS_Shape &	E,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillFaceSFS()

void TopOpeBRepBuild_Builder::GFillFaceSFS	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GFillFacesWES()

void TopOpeBRepBuild_Builder::GFillFacesWES	(	const TopTools_ListOfShape &	LF1,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillFacesWESK()

void TopOpeBRepBuild_Builder::GFillFacesWESK	(	const TopTools_ListOfShape &	LF1,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES,
		const Standard_Integer	K
	)

◆ GFillFacesWESMakeFaces()

void TopOpeBRepBuild_Builder::GFillFacesWESMakeFaces	(	const TopTools_ListOfShape &	LF1,
		const TopTools_ListOfShape &	LF2,
		const TopTools_ListOfShape &	LSO,
		const TopOpeBRepBuild_GTopo &	G
	)

◆ GFillFaceWES()

void TopOpeBRepBuild_Builder::GFillFaceWES	(	const TopoDS_Shape &	F,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillONPartsWES()

void TopOpeBRepBuild_Builder::GFillONPartsWES	(	const TopoDS_Shape &	F,
		const TopOpeBRepBuild_GTopo &	G,
		const TopTools_ListOfShape &	LSclass,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillPointTopologyPVS() [1/2]

void TopOpeBRepBuild_Builder::GFillPointTopologyPVS	(	const TopoDS_Shape &	E,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_PaveSet &	PVS
	)

◆ GFillPointTopologyPVS() [2/2]

void TopOpeBRepBuild_Builder::GFillPointTopologyPVS	(	const TopoDS_Shape &	E,
		const TopOpeBRepDS_PointIterator &	IT,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_PaveSet &	PVS
	)		const

◆ GFillShellSFS()

virtual void TopOpeBRepBuild_Builder::GFillShellSFS	(	const TopoDS_Shape &	SH1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

virtual

Reimplemented in TopOpeBRepBuild_Builder1.

◆ GFillSolidSFS()

virtual void TopOpeBRepBuild_Builder::GFillSolidSFS	(	const TopoDS_Shape &	SO1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

virtual

Reimplemented in TopOpeBRepBuild_Builder1.

◆ GFillSolidsSFS()

void TopOpeBRepBuild_Builder::GFillSolidsSFS	(	const TopTools_ListOfShape &	LSO1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GFillSurfaceTopologySFS() [1/2]

void TopOpeBRepBuild_Builder::GFillSurfaceTopologySFS	(	const TopoDS_Shape &	SO1,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GFillSurfaceTopologySFS() [2/2]

void TopOpeBRepBuild_Builder::GFillSurfaceTopologySFS	(	const TopOpeBRepDS_SurfaceIterator &	IT,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)		const

◆ GFillWireWES()

void TopOpeBRepBuild_Builder::GFillWireWES	(	const TopoDS_Shape &	W,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFindSamDom() [1/2]

void TopOpeBRepBuild_Builder::GFindSamDom	(	const TopoDS_Shape &	S,
		TopTools_ListOfShape &	L1,
		TopTools_ListOfShape &	L2
	)		const

◆ GFindSamDom() [2/2]

void TopOpeBRepBuild_Builder::GFindSamDom	(	TopTools_ListOfShape &	L1,
		TopTools_ListOfShape &	L2
	)		const

◆ GFindSamDomSODO() [1/2]

void TopOpeBRepBuild_Builder::GFindSamDomSODO	(	const TopoDS_Shape &	S,
		TopTools_ListOfShape &	LSO,
		TopTools_ListOfShape &	LDO
	)		const

◆ GFindSamDomSODO() [2/2]

void TopOpeBRepBuild_Builder::GFindSamDomSODO	(	TopTools_ListOfShape &	LSO,
		TopTools_ListOfShape &	LDO
	)		const

◆ GFindSameRank()

void TopOpeBRepBuild_Builder::GFindSameRank	(	const TopTools_ListOfShape &	L1,
		const Standard_Integer	R,
		TopTools_ListOfShape &	L2
	)		const

◆ GIsShapeOf()

Standard_Boolean TopOpeBRepBuild_Builder::GIsShapeOf	(	const TopoDS_Shape &	S,
		const Standard_Integer	I12
	)		const

◆ GKeepShape()

Standard_Boolean TopOpeBRepBuild_Builder::GKeepShape	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	Lref,
		const TopAbs_State	T
	)

◆ GKeepShape1()

Standard_Boolean TopOpeBRepBuild_Builder::GKeepShape1	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	Lref,
		const TopAbs_State	T,
		TopAbs_State &	pos
	)

return True if S is classified <T> / Lref shapes

◆ GKeepShapes()

void TopOpeBRepBuild_Builder::GKeepShapes	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	Lref,
		const TopAbs_State	T,
		const TopTools_ListOfShape &	Lin,
		TopTools_ListOfShape &	Lou
	)

add to Lou the shapes of Lin classified <T> / Lref shapes. Lou is not cleared. (S is a dummy trace argument)

◆ GMapShapes()

void TopOpeBRepBuild_Builder::GMapShapes	(	const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

◆ GMergeEdges()

void TopOpeBRepBuild_Builder::GMergeEdges	(	const TopTools_ListOfShape &	LE1,
		const TopTools_ListOfShape &	LE2,
		const TopOpeBRepBuild_GTopo &	G
	)

◆ GMergeEdgeWES()

void TopOpeBRepBuild_Builder::GMergeEdgeWES	(	const TopoDS_Shape &	E,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GMergeFaces()

void TopOpeBRepBuild_Builder::GMergeFaces	(	const TopTools_ListOfShape &	LF1,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G
	)

◆ GMergeFaceSFS()

void TopOpeBRepBuild_Builder::GMergeFaceSFS	(	const TopoDS_Shape &	F,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GMergeSolids()

void TopOpeBRepBuild_Builder::GMergeSolids	(	const TopTools_ListOfShape &	LSO1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G
	)

◆ GParamOnReference()

Standard_Boolean TopOpeBRepBuild_Builder::GParamOnReference	(	const TopoDS_Vertex &	V,
		const TopoDS_Edge &	E,
		Standard_Real &	P
	)		const

◆ GPVSMakeEdges()

void TopOpeBRepBuild_Builder::GPVSMakeEdges	(	const TopoDS_Shape &	EF,
		TopOpeBRepBuild_PaveSet &	PVS,
		TopTools_ListOfShape &	LOE
	)		const

◆ GSFSMakeSolids()

void TopOpeBRepBuild_Builder::GSFSMakeSolids	(	const TopoDS_Shape &	SOF,
		TopOpeBRepBuild_ShellFaceSet &	SFS,
		TopTools_ListOfShape &	LOSO
	)

◆ GShapeRank()

Standard_Integer TopOpeBRepBuild_Builder::GShapeRank ( const TopoDS_Shape & S ) const

◆ GSOBUMakeSolids()

void TopOpeBRepBuild_Builder::GSOBUMakeSolids	(	const TopoDS_Shape &	SOF,
		TopOpeBRepBuild_SolidBuilder &	SOBU,
		TopTools_ListOfShape &	LOSO
	)

◆ GSplitEdge()

void TopOpeBRepBuild_Builder::GSplitEdge	(	const TopoDS_Shape &	E,
		const TopOpeBRepBuild_GTopo &	G,
		const TopTools_ListOfShape &	LSclass
	)

◆ GSplitEdgeWES()

void TopOpeBRepBuild_Builder::GSplitEdgeWES	(	const TopoDS_Shape &	E,
		const TopTools_ListOfShape &	LF2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GSplitFace()

void TopOpeBRepBuild_Builder::GSplitFace	(	const TopoDS_Shape &	F,
		const TopOpeBRepBuild_GTopo &	G,
		const TopTools_ListOfShape &	LSclass
	)

◆ GSplitFaceSFS()

void TopOpeBRepBuild_Builder::GSplitFaceSFS	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LSclass,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GTakeCommonOfDiff()

static Standard_Boolean TopOpeBRepBuild_Builder::GTakeCommonOfDiff ( const TopOpeBRepBuild_GTopo & G )

static

◆ GTakeCommonOfSame()

static Standard_Boolean TopOpeBRepBuild_Builder::GTakeCommonOfSame ( const TopOpeBRepBuild_GTopo & G )

static

◆ GToMerge()

Standard_Boolean TopOpeBRepBuild_Builder::GToMerge ( const TopoDS_Shape & S ) const

◆ GToSplit()

Standard_Boolean TopOpeBRepBuild_Builder::GToSplit	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)		const

◆ GtraceSPS() [1/4]

Standard_Boolean TopOpeBRepBuild_Builder::GtraceSPS ( const Standard_Integer iS ) const

◆ GtraceSPS() [2/4]

Standard_Boolean TopOpeBRepBuild_Builder::GtraceSPS	(	const Standard_Integer	iS,
		const Standard_Integer	jS
	)		const

◆ GtraceSPS() [3/4]

Standard_Boolean TopOpeBRepBuild_Builder::GtraceSPS ( const TopoDS_Shape & S ) const

◆ GtraceSPS() [4/4]

Standard_Boolean TopOpeBRepBuild_Builder::GtraceSPS	(	const TopoDS_Shape &	S,
		Standard_Integer &	IS
	)		const

◆ GWESMakeFaces()

virtual void TopOpeBRepBuild_Builder::GWESMakeFaces	(	const TopoDS_Shape &	FF,
		TopOpeBRepBuild_WireEdgeSet &	WES,
		TopTools_ListOfShape &	LOF
	)

virtual

Reimplemented in TopOpeBRepBuild_Builder1.

◆ InitSection()

void TopOpeBRepBuild_Builder::InitSection ( )

◆ IsKPart()

Standard_Integer TopOpeBRepBuild_Builder::IsKPart ( ) const

◆ IsMerged()

Standard_Boolean TopOpeBRepBuild_Builder::IsMerged	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)		const

Returns True if the shape <S> has been merged.

◆ IsShapeOf()

Standard_Boolean TopOpeBRepBuild_Builder::IsShapeOf	(	const TopoDS_Shape &	S,
		const Standard_Integer	I12
	)		const

◆ IsSplit()

Standard_Boolean TopOpeBRepBuild_Builder::IsSplit	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)		const

Returns True if the shape <S> has been split.

◆ KeepShape()

Standard_Boolean TopOpeBRepBuild_Builder::KeepShape	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	LS,
		const TopAbs_State	T
	)

◆ KPclassF()

TopAbs_State TopOpeBRepBuild_Builder::KPclassF	(	const TopoDS_Shape &	F1,
		const TopoDS_Shape &	F2
	)

◆ KPclassFF()

void TopOpeBRepBuild_Builder::KPclassFF	(	const TopoDS_Shape &	F1,
		const TopoDS_Shape &	F2,
		TopAbs_State &	T1,
		TopAbs_State &	T2
	)

◆ KPclasSS() [1/3]

TopAbs_State TopOpeBRepBuild_Builder::KPclasSS	(	const TopoDS_Shape &	S1,
		const TopTools_ListOfShape &	exceptLS1,
		const TopoDS_Shape &	S2
	)

◆ KPclasSS() [2/3]

TopAbs_State TopOpeBRepBuild_Builder::KPclasSS	(	const TopoDS_Shape &	S1,
		const TopoDS_Shape &	exceptS1,
		const TopoDS_Shape &	S2
	)

◆ KPclasSS() [3/3]

TopAbs_State TopOpeBRepBuild_Builder::KPclasSS	(	const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

◆ KPClearMaps()

void TopOpeBRepBuild_Builder::KPClearMaps ( )

◆ KPContains()

static Standard_Boolean TopOpeBRepBuild_Builder::KPContains	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	L
	)

static

◆ KPisdisj()

Standard_Integer TopOpeBRepBuild_Builder::KPisdisj ( )

◆ KPisdisjanalyse()

void TopOpeBRepBuild_Builder::KPisdisjanalyse	(	const TopAbs_State	ST1,
		const TopAbs_State	ST2,
		Standard_Integer &	I,
		Standard_Integer &	IC1,
		Standard_Integer &	IC2
	)		const

◆ KPisdisjsh()

Standard_Integer TopOpeBRepBuild_Builder::KPisdisjsh ( const TopoDS_Shape & S ) const

◆ KPisfafa()

Standard_Integer TopOpeBRepBuild_Builder::KPisfafa ( )

◆ KPisfafash()

Standard_Integer TopOpeBRepBuild_Builder::KPisfafash ( const TopoDS_Shape & S ) const

◆ KPiskole()

Standard_Integer TopOpeBRepBuild_Builder::KPiskole ( )

◆ KPiskoleanalyse()

void TopOpeBRepBuild_Builder::KPiskoleanalyse	(	const TopAbs_State	FT1,
		const TopAbs_State	FT2,
		const TopAbs_State	ST1,
		const TopAbs_State	ST2,
		Standard_Integer &	I,
		Standard_Integer &	I1,
		Standard_Integer &	I2
	)		const

◆ KPiskoleFF()

Standard_Boolean TopOpeBRepBuild_Builder::KPiskoleFF	(	const TopoDS_Shape &	F1,
		const TopoDS_Shape &	F2,
		TopAbs_State &	T1,
		TopAbs_State &	T2
	)

◆ KPiskolesh()

Standard_Boolean TopOpeBRepBuild_Builder::KPiskolesh	(	const TopoDS_Shape &	S,
		TopTools_ListOfShape &	LS,
		TopTools_ListOfShape &	LF
	)		const

◆ KPiskoletge()

Standard_Integer TopOpeBRepBuild_Builder::KPiskoletge ( )

◆ KPiskoletgeanalyse()

void TopOpeBRepBuild_Builder::KPiskoletgeanalyse	(	const TopOpeBRepDS_Config	Conf,
		const TopAbs_State	ST1,
		const TopAbs_State	ST2,
		Standard_Integer &	I
	)		const

◆ KPiskoletgesh()

Standard_Boolean TopOpeBRepBuild_Builder::KPiskoletgesh	(	const TopoDS_Shape &	S,
		TopTools_ListOfShape &	LS,
		TopTools_ListOfShape &	LF
	)		const

◆ KPissoso()

Standard_Integer TopOpeBRepBuild_Builder::KPissoso ( )

◆ KPissososh()

Standard_Integer TopOpeBRepBuild_Builder::KPissososh ( const TopoDS_Shape & S ) const

◆ KPlhg() [1/2]

Standard_Integer TopOpeBRepBuild_Builder::KPlhg	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T,
		TopTools_ListOfShape &	L
	)		const

◆ KPlhg() [2/2]

Standard_Integer TopOpeBRepBuild_Builder::KPlhg	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T
	)		const

◆ KPlhsd() [1/2]

Standard_Integer TopOpeBRepBuild_Builder::KPlhsd	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T,
		TopTools_ListOfShape &	L
	)		const

◆ KPlhsd() [2/2]

Standard_Integer TopOpeBRepBuild_Builder::KPlhsd	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T
	)		const

◆ KPls() [1/2]

static Standard_Integer TopOpeBRepBuild_Builder::KPls	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T,
		TopTools_ListOfShape &	L
	)

static

◆ KPls() [2/2]

static Standard_Integer TopOpeBRepBuild_Builder::KPls	(	const TopoDS_Shape &	S,
		const TopAbs_ShapeEnum	T
	)

static

◆ KPmakeface()

TopoDS_Shape TopOpeBRepBuild_Builder::KPmakeface	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LF2,
		const TopAbs_State	T1,
		const TopAbs_State	T2,
		const Standard_Boolean	R1,
		const Standard_Boolean	R2
	)

◆ KPreturn()

static Standard_Integer TopOpeBRepBuild_Builder::KPreturn ( const Standard_Integer KP )

static

◆ KPSameDomain()

void TopOpeBRepBuild_Builder::KPSameDomain	(	TopTools_ListOfShape &	L1,
		TopTools_ListOfShape &	L2
	)		const

◆ MakeEdges()

void TopOpeBRepBuild_Builder::MakeEdges	(	const TopoDS_Shape &	E,
		TopOpeBRepBuild_EdgeBuilder &	B,
		TopTools_ListOfShape &	L
	)

◆ MakeFaces()

void TopOpeBRepBuild_Builder::MakeFaces	(	const TopoDS_Shape &	F,
		TopOpeBRepBuild_FaceBuilder &	B,
		TopTools_ListOfShape &	L
	)

◆ MakeShells()

void TopOpeBRepBuild_Builder::MakeShells	(	TopOpeBRepBuild_SolidBuilder &	B,
		TopTools_ListOfShape &	L
	)

◆ MakeSolids()

void TopOpeBRepBuild_Builder::MakeSolids	(	TopOpeBRepBuild_SolidBuilder &	B,
		TopTools_ListOfShape &	L
	)

◆ MapShapes()

void TopOpeBRepBuild_Builder::MapShapes	(	const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

◆ MarkSplit()

void TopOpeBRepBuild_Builder::MarkSplit	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB,
		const Standard_Boolean	B = `Standard_True`
	)

protected

add the shape <S> to the map of split shapes. mark <S> as split/not split on <state>, according to B value.

◆ Merged()

const TopTools_ListOfShape& TopOpeBRepBuild_Builder::Merged	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)		const

Returns the merged parts <TB> of shape <S>.

◆ MergeEdges()

void TopOpeBRepBuild_Builder::MergeEdges	(	const TopTools_ListOfShape &	L1,
		const TopAbs_State	TB1,
		const TopTools_ListOfShape &	L2,
		const TopAbs_State	TB2,
		const Standard_Boolean	onA = `Standard_False`,
		const Standard_Boolean	onB = `Standard_False`,
		const Standard_Boolean	onAB = `Standard_False`
	)

Merges the two edges <S1> and <S2> keeping the parts in each edge of states <TB1> and <TB2>. Booleans onA, onB, onAB indicate whether parts of edges found as state ON respectively on first, second, and both shapes must be (or not) built.

◆ MergeFaces()

void TopOpeBRepBuild_Builder::MergeFaces	(	const TopTools_ListOfShape &	S1,
		const TopAbs_State	TB1,
		const TopTools_ListOfShape &	S2,
		const TopAbs_State	TB2,
		const Standard_Boolean	onA = `Standard_False`,
		const Standard_Boolean	onB = `Standard_False`,
		const Standard_Boolean	onAB = `Standard_False`
	)

Merges the two faces <S1> and <S2> keeping the parts in each face of states <TB1> and <TB2>.

◆ MergeKPart() [1/2]

virtual void TopOpeBRepBuild_Builder::MergeKPart ( )

virtual

Reimplemented in TopOpeBRepBuild_Builder1.

◆ MergeKPart() [2/2]

virtual void TopOpeBRepBuild_Builder::MergeKPart	(	const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

virtual

Reimplemented in TopOpeBRepBuild_Builder1.

◆ MergeKPartisdisj()

void TopOpeBRepBuild_Builder::MergeKPartisdisj ( )

◆ MergeKPartisfafa()

void TopOpeBRepBuild_Builder::MergeKPartisfafa ( )

◆ MergeKPartiskole()

void TopOpeBRepBuild_Builder::MergeKPartiskole ( )

◆ MergeKPartiskoletge()

void TopOpeBRepBuild_Builder::MergeKPartiskoletge ( )

◆ MergeKPartissoso()

void TopOpeBRepBuild_Builder::MergeKPartissoso ( )

◆ MergeShapes()

void TopOpeBRepBuild_Builder::MergeShapes	(	const TopoDS_Shape &	S1,
		const TopAbs_State	TB1,
		const TopoDS_Shape &	S2,
		const TopAbs_State	TB2
	)

Merges the two shapes <S1> and <S2> keeping the parts of states <TB1>,<TB2> in <S1>,<S2>.

◆ MergeSolid()

void TopOpeBRepBuild_Builder::MergeSolid	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)

Merges the solid <S> keeping the parts of state <TB>.

◆ MergeSolids()

void TopOpeBRepBuild_Builder::MergeSolids	(	const TopoDS_Shape &	S1,
		const TopAbs_State	TB1,
		const TopoDS_Shape &	S2,
		const TopAbs_State	TB2
	)

Merges the two solids <S1> and <S2> keeping the parts in each solid of states <TB1> and <TB2>.

◆ MSplit()

const TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State& TopOpeBRepBuild_Builder::MSplit ( const TopAbs_State s ) const

◆ NewEdges()

const TopTools_ListOfShape& TopOpeBRepBuild_Builder::NewEdges ( const Standard_Integer I ) const

Returns the edges created on curve .

◆ NewFaces()

const TopTools_ListOfShape& TopOpeBRepBuild_Builder::NewFaces ( const Standard_Integer I ) const

Returns the faces created on surface .

◆ NewVertex()

const TopoDS_Shape& TopOpeBRepBuild_Builder::NewVertex ( const Standard_Integer I ) const

Returns the vertex created on point .

◆ Opec12()

Standard_Boolean TopOpeBRepBuild_Builder::Opec12 ( ) const

◆ Opec21()

Standard_Boolean TopOpeBRepBuild_Builder::Opec21 ( ) const

◆ Opecom()

Standard_Boolean TopOpeBRepBuild_Builder::Opecom ( ) const

◆ Opefus()

Standard_Boolean TopOpeBRepBuild_Builder::Opefus ( ) const

◆ Orient()

static TopAbs_Orientation TopOpeBRepBuild_Builder::Orient	(	const TopAbs_Orientation	O,
		const Standard_Boolean	R
	)

static

◆ Perform() [1/2]

virtual void TopOpeBRepBuild_Builder::Perform ( const Handle< TopOpeBRepDS_HDataStructure > & HDS )

virtual

Stores the data structure <HDS>, Create shapes from the new geometries.

Reimplemented in TopOpeBRepBuild_Builder1.

◆ Perform() [2/2]

virtual void TopOpeBRepBuild_Builder::Perform	(	const Handle< TopOpeBRepDS_HDataStructure > &	HDS,
		const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

virtual

Stores the data structure <HDS>, Create shapes from the new geometries, Evaluates if an operation performed on shapes S1,S2 is a particular case.

Reimplemented in TopOpeBRepBuild_Builder1.

◆ PrintCur()

static void TopOpeBRepBuild_Builder::PrintCur ( const TopoDS_Edge & E )

static

◆ PrintGeo()

static void TopOpeBRepBuild_Builder::PrintGeo ( const TopoDS_Shape & S )

static

◆ PrintOri()

static void TopOpeBRepBuild_Builder::PrintOri ( const TopoDS_Shape & S )

static

◆ PrintPnt()

static void TopOpeBRepBuild_Builder::PrintPnt ( const TopoDS_Vertex & V )

static

◆ PrintSur()

static void TopOpeBRepBuild_Builder::PrintSur ( const TopoDS_Face & F )

static

◆ RegularizeFace()

void TopOpeBRepBuild_Builder::RegularizeFace	(	const TopoDS_Shape &	FF,
		const TopoDS_Shape &	newFace,
		TopTools_ListOfShape &	LOF
	)

◆ RegularizeFaces()

void TopOpeBRepBuild_Builder::RegularizeFaces	(	const TopoDS_Shape &	FF,
		const TopTools_ListOfShape &	lnewFace,
		TopTools_ListOfShape &	LOF
	)

◆ RegularizeSolid()

void TopOpeBRepBuild_Builder::RegularizeSolid	(	const TopoDS_Shape &	SS,
		const TopoDS_Shape &	newSolid,
		TopTools_ListOfShape &	LOS
	)

◆ RegularizeSolids()

void TopOpeBRepBuild_Builder::RegularizeSolids	(	const TopoDS_Shape &	SS,
		const TopTools_ListOfShape &	lnewSolid,
		TopTools_ListOfShape &	LOS
	)

◆ Reverse()

static Standard_Boolean TopOpeBRepBuild_Builder::Reverse	(	const TopAbs_State	T1,
		const TopAbs_State	T2
	)

static

◆ Section() [1/2]

void TopOpeBRepBuild_Builder::Section ( TopTools_ListOfShape & L )

return all section edges.

◆ Section() [2/2]

const TopTools_ListOfShape& TopOpeBRepBuild_Builder::Section ( )

◆ SectionCurves()

void TopOpeBRepBuild_Builder::SectionCurves ( TopTools_ListOfShape & L )

return the section edges built on new curves.

◆ SectionEdges()

void TopOpeBRepBuild_Builder::SectionEdges ( TopTools_ListOfShape & L )

return the parts of edges found ON the boundary of the two arguments S1,S2 of Perform()

◆ ShapePosition()

TopAbs_State TopOpeBRepBuild_Builder::ShapePosition	(	const TopoDS_Shape &	S,
		const TopTools_ListOfShape &	LS
	)

◆ ShapeRank()

Standard_Integer TopOpeBRepBuild_Builder::ShapeRank ( const TopoDS_Shape & S ) const

◆ SplitEdge()

void TopOpeBRepBuild_Builder::SplitEdge	(	const TopoDS_Shape &	E1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

Split <E1> keeping the parts of state <TB1>.

◆ SplitEdge1()

void TopOpeBRepBuild_Builder::SplitEdge1	(	const TopoDS_Shape &	E1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

Split <E1> keeping the parts of state <TB1>.

◆ SplitEdge2()

void TopOpeBRepBuild_Builder::SplitEdge2	(	const TopoDS_Shape &	E1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

Split <E1> keeping the parts of state <TB1>.

◆ SplitEvisoONperiodicF()

void TopOpeBRepBuild_Builder::SplitEvisoONperiodicF ( )

◆ SplitFace()

void TopOpeBRepBuild_Builder::SplitFace	(	const TopoDS_Shape &	F1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

Split <F1> keeping the parts of state <TB1>. Merge faces with same domain, keeping parts of state <TB2>.

◆ SplitFace1()

void TopOpeBRepBuild_Builder::SplitFace1	(	const TopoDS_Shape &	F1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

◆ SplitFace2()

void TopOpeBRepBuild_Builder::SplitFace2	(	const TopoDS_Shape &	F1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

◆ Splits()

const TopTools_ListOfShape& TopOpeBRepBuild_Builder::Splits	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)		const

Returns the split parts <TB> of shape <S>.

◆ SplitSectionEdge()

virtual void TopOpeBRepBuild_Builder::SplitSectionEdge ( const TopoDS_Shape & E )

virtual

create parts ON solid of section edges

◆ SplitSectionEdges()

void TopOpeBRepBuild_Builder::SplitSectionEdges ( )

create parts ON solid of section edges

◆ SplitShapes()

void TopOpeBRepBuild_Builder::SplitShapes	(	TopOpeBRepTool_ShapeExplorer &	Ex,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2,
		TopOpeBRepBuild_ShapeSet &	SS,
		const Standard_Boolean	RevOri
	)

protected

Explore shapes of given by explorer <Ex> to split them. Store new shapes in the set <SS>. According to RevOri, reverse or not their orientation.

◆ SplitSolid()

void TopOpeBRepBuild_Builder::SplitSolid	(	const TopoDS_Shape &	S1,
		const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

protected

Split <S1> keeping the parts of state <TB1>.

◆ StringState()

static TCollection_AsciiString TopOpeBRepBuild_Builder::StringState ( const TopAbs_State S )

static

◆ TopType()

static TopAbs_ShapeEnum TopOpeBRepBuild_Builder::TopType ( const TopoDS_Shape & S )

static

◆ ToSplit()

Standard_Boolean TopOpeBRepBuild_Builder::ToSplit	(	const TopoDS_Shape &	S,
		const TopAbs_State	TB
	)		const

protected

Returns True if the shape <S> has not already been split.

◆ UpdateSplitAndMerged()

void TopOpeBRepBuild_Builder::UpdateSplitAndMerged	(	const TopTools_DataMapOfIntegerListOfShape &	mle,
		const TopTools_DataMapOfIntegerShape &	mre,
		const TopTools_DataMapOfShapeShape &	mlf,
		const TopAbs_State	state
	)

protected

Field Documentation

◆ myBuildTool

TopOpeBRepDS_BuildTool TopOpeBRepBuild_Builder::myBuildTool

protected

◆ myClassifyDef

Standard_Boolean TopOpeBRepBuild_Builder::myClassifyDef

protected

◆ myClassifyVal

Standard_Boolean TopOpeBRepBuild_Builder::myClassifyVal

protected

◆ myDataStructure

Handle< TopOpeBRepDS_HDataStructure > TopOpeBRepBuild_Builder::myDataStructure

protected

◆ myEdgeAvoid

TopTools_ListOfShape TopOpeBRepBuild_Builder::myEdgeAvoid

protected

◆ myEdgeReference

TopoDS_Edge TopOpeBRepBuild_Builder::myEdgeReference

protected

◆ myEdgeToFill

TopoDS_Edge TopOpeBRepBuild_Builder::myEdgeToFill

protected

◆ myEmptyAS

TCollection_AsciiString TopOpeBRepBuild_Builder::myEmptyAS

protected

◆ myEmptyShapeList

TopTools_ListOfShape TopOpeBRepBuild_Builder::myEmptyShapeList

protected

◆ myESplits

TopTools_DataMapOfShapeListOfShape TopOpeBRepBuild_Builder::myESplits

protected

◆ myFaceAvoid

TopTools_ListOfShape TopOpeBRepBuild_Builder::myFaceAvoid

protected

◆ myFaceReference

TopoDS_Face TopOpeBRepBuild_Builder::myFaceReference

protected

◆ myFaceToFill

TopoDS_Face TopOpeBRepBuild_Builder::myFaceToFill

protected

◆ myFSplits

TopTools_DataMapOfShapeListOfShape TopOpeBRepBuild_Builder::myFSplits

protected

◆ myIsKPart

Standard_Integer TopOpeBRepBuild_Builder::myIsKPart

protected

◆ myKPMAPf1f2

TopTools_DataMapOfShapeListOfShape TopOpeBRepBuild_Builder::myKPMAPf1f2

protected

◆ myListOfEdge

TopTools_ListOfShape TopOpeBRepBuild_Builder::myListOfEdge

protected

◆ myListOfFace

TopTools_ListOfShape TopOpeBRepBuild_Builder::myListOfFace

protected

◆ myListOfSolid

TopTools_ListOfShape TopOpeBRepBuild_Builder::myListOfSolid

protected

◆ myMAP1

TopTools_IndexedMapOfShape TopOpeBRepBuild_Builder::myMAP1

protected

◆ myMAP2

TopTools_IndexedMapOfShape TopOpeBRepBuild_Builder::myMAP2

protected

◆ myMemoSplit

TopTools_MapOfShape TopOpeBRepBuild_Builder::myMemoSplit

protected

◆ myMergedIN

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State TopOpeBRepBuild_Builder::myMergedIN

protected

◆ myMergedON

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State TopOpeBRepBuild_Builder::myMergedON

protected

◆ myMergedOUT

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State TopOpeBRepBuild_Builder::myMergedOUT

protected

◆ myNewEdges

TopTools_DataMapOfIntegerListOfShape TopOpeBRepBuild_Builder::myNewEdges

protected

◆ myNewFaces

Handle< TopTools_HArray1OfListOfShape > TopOpeBRepBuild_Builder::myNewFaces

protected

◆ myNewVertices

Handle< TopTools_HArray1OfShape > TopOpeBRepBuild_Builder::myNewVertices

protected

◆ myONElemMap

TopTools_IndexedMapOfOrientedShape TopOpeBRepBuild_Builder::myONElemMap

protected

◆ myONFacesMap

TopTools_IndexedDataMapOfShapeShape TopOpeBRepBuild_Builder::myONFacesMap

protected

◆ myProcessON

Standard_Boolean TopOpeBRepBuild_Builder::myProcessON

protected

◆ mySection

TopTools_ListOfShape TopOpeBRepBuild_Builder::mySection

protected

◆ mySectionDone

Standard_Boolean TopOpeBRepBuild_Builder::mySectionDone

protected

◆ myShape1

TopoDS_Shape TopOpeBRepBuild_Builder::myShape1

protected

◆ myShape2

TopoDS_Shape TopOpeBRepBuild_Builder::myShape2

protected

◆ myShapeClassifier

TopOpeBRepTool_ShapeClassifier TopOpeBRepBuild_Builder::myShapeClassifier

protected

◆ mySHASETindex

Standard_Integer TopOpeBRepBuild_Builder::mySHASETindex

protected

◆ mySolidReference

TopoDS_Solid TopOpeBRepBuild_Builder::mySolidReference

protected

◆ mySolidToFill

TopoDS_Solid TopOpeBRepBuild_Builder::mySolidToFill

protected

◆ mySplitIN

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State TopOpeBRepBuild_Builder::mySplitIN

protected

◆ mySplitON

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State TopOpeBRepBuild_Builder::mySplitON

protected

◆ mySplitOUT

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State TopOpeBRepBuild_Builder::mySplitOUT

protected

◆ mySplitSectionEdgesDone

Standard_Boolean TopOpeBRepBuild_Builder::mySplitSectionEdgesDone

protected

◆ myState1

TopAbs_State TopOpeBRepBuild_Builder::myState1

protected

◆ myState2

TopAbs_State TopOpeBRepBuild_Builder::myState2

protected

◆ myVertexAvoid

TopTools_ListOfShape TopOpeBRepBuild_Builder::myVertexAvoid

protected

The documentation for this class was generated from the following file:

TopOpeBRepBuild_Builder.hxx

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ TopOpeBRepBuild_Builder()

◆ ~TopOpeBRepBuild_Builder()

Member Function Documentation

◆ AddIntersectionEdges()

◆ AddONPatchesSFS()

◆ BuildEdges() [1/2]

◆ BuildEdges() [2/2]

◆ BuildFaces() [1/2]

◆ BuildFaces() [2/2]

◆ BuildTool()

◆ BuildVertices()

◆ ChangeBuildTool()

◆ ChangeClassify()

◆ ChangeMerged()

◆ ChangeMSplit()

◆ ChangeNewEdges()

◆ ChangeNewFaces()

◆ ChangeNewVertex()

◆ ChangeSplit()

◆ Classify()

◆ Clear()

◆ ClearMaps()

◆ Contains()

◆ DataStructure()

◆ End()

◆ FillFace()

◆ FillOnPatches()

◆ FillSecEdgeAncestorMap()

◆ FillShape()

◆ FillSolid()

◆ FillVertexSet()

◆ FillVertexSetOnValue()

◆ FindFacesTouchingEdge()

◆ FindIsKPart()

◆ FindSameDomain()

◆ FindSameDomainSameOrientation()

◆ FindSameRank()

◆ GcheckNBOUNDS()

◆ GClearMaps()

◆ GContains()

◆ GCopyList() [1/2]

◆ GCopyList() [2/2]

◆ GdumpEDBU()

◆ GdumpEDG()

◆ GdumpEDGVER()

◆ GdumpEXP()

◆ GdumpFABU()

◆ GdumpLS()

◆ GdumpORIPARPNT()

◆ GdumpPNT()

◆ GdumpSAMDOM()

◆ GdumpSHA()

◆ GdumpSHAORI()

◆ GdumpSHAORIGEO()

◆ GdumpSHASETindex()

◆ GdumpSHASETreset()

◆ GdumpSHASTA() [1/3]

◆ GdumpSHASTA() [2/3]

◆ GdumpSHASTA() [3/3]

◆ GdumpSOBU()

◆ GEDBUMakeEdges()

◆ GFABUMakeFaces()

◆ GFillCurveTopologyWES() [1/2]

◆ GFillCurveTopologyWES() [2/2]

◆ GFillEdgePVS()

◆ GFillEdgesPVS()

◆ GFillEdgeWES()

◆ GFillFaceSFS()

◆ GFillFacesWES()

◆ GFillFacesWESK()

◆ GFillFacesWESMakeFaces()

◆ GFillFaceWES()

◆ GFillONPartsWES()

◆ GFillPointTopologyPVS() [1/2]