TopAbs Class Reference

This package gives resources for Topology oriented applications such as : Topological Data Structure, Topological Algorithms. More...

#include <TopAbs.hxx>

Static Public Member Functions
static TopAbs_Orientation	Compose (const TopAbs_Orientation Or1, const TopAbs_Orientation Or2)
	Compose the Orientation <Or1> and <Or2>. This composition is not symmetric (if you switch <Or1> and <Or2> the result is different). It assumes that <Or1> is the Orientation of a Shape S1 containing a Shape S2 of Orientation Or2. The result is the cumulated orientation of S2 in S1. The composition law is : More...
static TopAbs_Orientation	Reverse (const TopAbs_Orientation Or)
	xchanges the interior/exterior status of the two sides. This is what happens when the sense of direction is reversed. The following rules apply: More...
static TopAbs_Orientation	Complement (const TopAbs_Orientation Or)
	Reverses the interior/exterior status of each side of the object. So, to take the complement of an object means to reverse the interior/exterior status of its boundary, i.e. inside becomes outside. The method returns the complementary orientation, following the rules in the table below: FORWARD REVERSED REVERSED FORWARD INTERNAL EXTERNAL EXTERNAL INTERNAL. More...
static Standard_OStream &	Print (const TopAbs_ShapeEnum theShapeType, Standard_OStream &theStream)
	Prints the name of Shape type as a String on the Stream. More...
static Standard_OStream &	Print (const TopAbs_Orientation theOrientation, Standard_OStream &theStream)
	Prints the name of the Orientation as a String on the Stream. More...
static Standard_OStream &	Print (const TopAbs_State St, Standard_OStream &S)
	Prints the name of the State <St> as a String on the Stream <S> and returns <S>. More...
static Standard_CString	ShapeTypeToString (TopAbs_ShapeEnum theType)
	Returns the string name for a given shape type. More...
static TopAbs_ShapeEnum	ShapeTypeFromString (Standard_CString theTypeString)
	Returns the shape type from the given string identifier (using case-insensitive comparison). More...
static Standard_Boolean	ShapeTypeFromString (Standard_CString theTypeString, TopAbs_ShapeEnum &theType)
	Determines the shape type from the given string identifier (using case-insensitive comparison). More...
static Standard_CString	ShapeOrientationToString (TopAbs_Orientation theOrientation)
	Returns the string name for a given shape orientation. More...
static TopAbs_Orientation	ShapeOrientationFromString (const Standard_CString theOrientationString)
	Returns the shape orientation from the given string identifier (using case-insensitive comparison). More...
static Standard_Boolean	ShapeOrientationFromString (const Standard_CString theOrientationString, TopAbs_Orientation &theOrientation)
	Determines the shape orientation from the given string identifier (using case-insensitive comparison). More...

Detailed Description

This package gives resources for Topology oriented applications such as : Topological Data Structure, Topological Algorithms.

It contains :

• The ShapeEnum enumeration to describe the different topological shapes.
• The Orientation enumeration to describe the orientation of a topological shape.
• The State enumeration to describes the position of a point relative to a Shape.
• Methods to manage the enumerations.

Member Function Documentation

Complement()

static TopAbs_Orientation TopAbs::Complement ( const TopAbs_Orientation  Or )

static

Reverses the interior/exterior status of each side of the object. So, to take the complement of an object means to reverse the interior/exterior status of its boundary, i.e. inside becomes outside. The method returns the complementary orientation, following the rules in the table below: FORWARD REVERSED REVERSED FORWARD INTERNAL EXTERNAL EXTERNAL INTERNAL.

Complement complements the material side. Inside becomes outside.

Compose()

static TopAbs_Orientation TopAbs::Compose ( const TopAbs_Orientation  Or1, const TopAbs_Orientation  Or2  )

static

Compose the Orientation <Or1> and <Or2>. This composition is not symmetric (if you switch <Or1> and <Or2> the result is different). It assumes that <Or1> is the Orientation of a Shape S1 containing a Shape S2 of Orientation Or2. The result is the cumulated orientation of S2 in S1. The composition law is :

\ Or2 FORWARD REVERSED INTERNAL EXTERNAL Or1 ----------------------------------— FORWARD | FORWARD REVERSED INTERNAL EXTERNAL | REVERSED | REVERSED FORWARD INTERNAL EXTERNAL | INTERNAL | INTERNAL INTERNAL INTERNAL INTERNAL | EXTERNAL | EXTERNAL EXTERNAL EXTERNAL EXTERNAL Note: The top corner in the table is the most important for the purposes of Open CASCADE topology and shape sharing.

Print() [1/3]

static Standard_OStream& TopAbs::Print ( const TopAbs_ShapeEnum  theShapeType, Standard_OStream &  theStream  )

inlinestatic

Prints the name of Shape type as a String on the Stream.

Print() [2/3]

static Standard_OStream& TopAbs::Print ( const TopAbs_Orientation  theOrientation, Standard_OStream &  theStream  )

inlinestatic

Prints the name of the Orientation as a String on the Stream.

Print() [3/3]

static Standard_OStream& TopAbs::Print ( const TopAbs_State  St, Standard_OStream &  S  )

static

Prints the name of the State <St> as a String on the Stream <S> and returns <S>.

Reverse()

static TopAbs_Orientation TopAbs::Reverse ( const TopAbs_Orientation  Or )

static

xchanges the interior/exterior status of the two sides. This is what happens when the sense of direction is reversed. The following rules apply:

FORWARD REVERSED REVERSED FORWARD INTERNAL INTERNAL EXTERNAL EXTERNAL

Reverse exchange the material sides.

ShapeOrientationFromString() [1/2]

static TopAbs_Orientation TopAbs::ShapeOrientationFromString ( const Standard_CString  theOrientationString )

inlinestatic

Returns the shape orientation from the given string identifier (using case-insensitive comparison).

Parameters

theOrientationString

string identifier

Returns

shape orientation or TopAbs_FORWARD if string identifier is invalid

ShapeOrientationFromString() [2/2]

static Standard_Boolean TopAbs::ShapeOrientationFromString ( const Standard_CString  theOrientationString, TopAbs_Orientation &  theOrientation  )

static

Determines the shape orientation from the given string identifier (using case-insensitive comparison).

Parameters

theOrientationString	string identifier
theOrientation	detected shape orientation

Returns

TRUE if string identifier is known

ShapeOrientationToString()

static Standard_CString TopAbs::ShapeOrientationToString ( TopAbs_Orientation  theOrientation )

static

Returns the string name for a given shape orientation.

Parameters

theOrientation

shape orientation

Returns

string identifier from the list FORWARD, REVERSED, INTERNAL, EXTERNAL

ShapeTypeFromString() [1/2]

static TopAbs_ShapeEnum TopAbs::ShapeTypeFromString ( Standard_CString  theTypeString )

inlinestatic

Returns the shape type from the given string identifier (using case-insensitive comparison).

Parameters

theTypeString

string identifier

Returns

shape type or TopAbs_SHAPE if string identifier is invalid

ShapeTypeFromString() [2/2]

static Standard_Boolean TopAbs::ShapeTypeFromString ( Standard_CString  theTypeString, TopAbs_ShapeEnum &  theType  )

static

Determines the shape type from the given string identifier (using case-insensitive comparison).

Parameters

theTypeString	string identifier
theType	detected shape type

Returns

TRUE if string identifier is known

ShapeTypeToString()

static Standard_CString TopAbs::ShapeTypeToString ( TopAbs_ShapeEnum  theType )

static

Returns the string name for a given shape type.

Parameters

theType

shape type

Returns

string identifier from the list COMPOUND, COMPSOLID, SOLID, SHELL, FACE, WIRE, EDGE, VERTEX, SHAPE

---

The documentation for this class was generated from the following file:

• TopAbs.hxx